Lead2pass provides terrific opportunity to heave your Microsoft skills and capabilities. You can easily pass Microsoft 70-412 exam under the guidence of our 70-412 dumps. Lead2pass ensure 100% pass rate.
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 and a member server named Server1. Server1 has the IP Address Management (IPAM) Server feature installed. On Dc1, you configure Windows Firewall to allow all of the necessary inbound ports for IPAM. On Server1, you open Server Manager as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can use IPAM on Server1 to manage DNS on DC1.
What should you do?
A. Modify the outbound firewall rules on Server1.
B. Modify the inbound firewall rules on Server1.
C. Add Server1 to the Remote Management Users group.
D. Add Server1 to the Event Log Readers group.
Your network contains an Active Directory domain named contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the IP Address Management (IPAM) Server feature installed.
You install the IPAM client on Server2.
You open Server Manager on Server2 as shown in the exhibit. (Click the Exhibit button.)
You need to manage IPAM from Server2.
What should you do first?
A. On Server1, add the Server2 computer account to the IPAM MSM Administrators group.
B. On Server2, open Computer Management and connect to Server1.
C. On Server2, add Server1 to Server Manager.
D. On Server1, add the Server2 computer account to the IPAM ASM Administrators group.
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Dc1. DC1 has the DNS Server server role installed. The network has two sites named Site1 and Site2. Site1 uses 10.10.0.0/16 IP addresses and Site2 uses 10.11.0.0/16 IP addresses. All computers use DC1 as their DNS server. The domain contains four servers named Server1, Server2, Server3, and Server4. All of the servers run a service named Service1. DNS host records are configured as shown in the exhibit. (Click the Exhibit button.)
You discover that computers from the 10.10.1.0/24 network always resolve Service1 to the [P address of Server1.
You need to configure DNS on DC1 to distribute computers in Site1 between Server1 and Server2 when the computers attempt to resolve Service1.
What should run on DC1?
A. dnscmd /config /bindsecondaries 1
B. dnscmd /config /localnetpriority 0
C. dnscmd /config /localnetprioritynetmask 0x0000ffff
D. dnscmd /config /roundrobin 0
A. Specifies use of fast transfer format used by legacy Berkeley Internet Name Domain (BIND) servers. 1 enables
B. Disables netmask ordering.
C. You can use the Dnscmd /Config /LocalNetPriorityNetMask 0x0000FFFF command to use class B ( or 16 bit) for netmask ordering for DNS round robin
D. Disables round robin rotation.
http://technet.microsoft.com/en-us/library/cc737355(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc738473(v=ws.10).aspx http://support.microsoft.com/kb/842197
Your network contains an Active Directory domain named contoso.com. The domain contains a main office and a branch office. An Active Directory site exists for each office. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Both servers have the DHCP Server server role installed. Server1 is located in the main office site. Server2 is located in the branch office site. Server1 provides IPv4 addresses to the client computers in the main office site. Server2 provides IPv4 addresses to the client computers in the branch office site.
You need to ensure that if either Server1 or Server2 are offline, the client computers can still obtain IPv4 addresses.
The solution must meet the following requirements:
– The storage location of the DHCP databases must not be a single point of failure.
– Server1 must provide IPv4 addresses to the client computers in the branch office site only if Server2 is offline.
– Server2 must provide IPv4 addresses to the client computers in the main office site only if Server1 is offline.
Which configuration should you use?
A. load sharing mode failover partners
B. a failover cluster
C. hot standby mode failover partners
D. a Network Load Balancing (NLB) cluster
You have a DHCP server named Server1. Server1 has an IP address 192.168.1.2 is located on a subnet that has a network ID of 192.168.1.0/24. On Server1, you create the scopes shown in the following table.
You need to ensure that Server1 can assign IP addresses from both scopes to the DHCP clients on the local subnet.
What should you create on Server1?
A. A scope
B. A superscope
C. A split-scope
D. A multicast scope
Your network contains servers that run Windows Server 2012 R2.
The network contains a large number of iSCSI storage locations and iSCSI clients.
You need to deploy a central repository that can discover and list iSCSI resources on the network automatically.
Which feature should you deploy?
A. the Windows Standards-Based Storage Management feature
B. the iSCSI Target Server role service
C. the iSCSI Target Storage Provider feature
D. the iSNS Server service feature
Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1. All servers run Windows Server 2012 R2. All domain user accounts have the Division attribute automatically populated as part of the user provisioning process.
The Support for Dynamic Access Control and Kerberos armoring policy is enabled for the domain.
You need to control access to the file shares on Server1 based on the values in the Division attribute and the Division resource property.
Which three actions should you perform in sequence?
First create a claim type for the property, then create a reference resource property that points back to the claim. Finally set the classification value on the folder
Your network contains two Active Directory forests named contoso.com and fabrikam.com.
The contoso.com forest contains two domains named corp.contoso.com and contoso.com.
You establish a two-way forest trust between contoso.com and fabrikam.com. Users from the corp.contoso.com domain report that they cannot log on to client computers in the fabrikam.com domain by using their corp.contoso.com user account.
When they try to log on, they receive following error message:
“The computer you are signing into is protected by an authentication firewall. The specified account is not allowed to authenticate to the computer.”
Corp.contoso.com users can log on successfully to client computers in the contoso.com domain by using their corp.contoso.com user account credentials.
You need to allow users from the corp.contoso.com domain to log on to the client computers in the fabrikam.com forest.
What should you do?
A. Configure Windows Firewall with Advanced Security.
B. Enable SID history.
C. Configure forest-wide authentication.
D. Instruct the users to log on by using a user principal name (UPN).
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Both servers have the Hyper-V server role installed.
The servers have the hardware configurations shown in the following table.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
You need to move the virtual machines from Server1 to Server2.
The solution must minimize downtime.
What should you do for each virtual machine?
A. Export the virtual machines from Server1 and import the virtual machines to Server2.
B. Perform a live migration.
C. Perform a quick migration.
D. Perform a storage migration.
None of these migration options will work between different Processors ( AMD/Intel).
The only option remaining is to export and re-import the VMs
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Both servers have the Hyper-V server role installed.
You plan to replicate virtual machines between Server1 and Server2. The replication will be encrypted by using Secure Sockets Layer (SSL).
You need to request a certificate on Server1 to ensure that the virtual machine replication is encrypted.
Which two intended purposes should the certificate for Server1 contain? (Each correct answer presents part of the solution. Choose two.)
A. Client Authentication
B. Kernel Mode Code Signing
C. Server Authentication
D. IP Security end system
E. KDC Authentication
Lead2pass only provide up dated and latest Microsoft 70-412 exam preparation questions and 100% ensure it will make you succeed. Passing the Microsoft is not a dream anymore as our user friendly learning resources ensure guaranteed success.
|One Time Purchase||✔||✖||✖||✖||✖|
|100% Pass Guarantee||✔||✖||✖||✖||✖|
|100% Money Back||✔||✖||✖||✖||✖|